How to Rekey Kwikset 660 Deadbolt: A Comprehensive Tutorial. In this video, Mr. Locksmith demonstrates a detailed process for rekeying the popular Kwikset 660 lock. The video covers all stages of rekeying, from removing the cylinder and the C-clip, through identifying the pins, to assembling the lock back again after rekeying. Besides the practical process, this video also provides valuable insights into lock mechanisms, including the function of different types of pins, the role of springs, and the concept of construction master.
How to Rekey Kwikset 660 Deadbolt
The Kwikset 660 deadbolt lock is known for its popularity and widespread use. Although it lacks smart key technology, it is commonly seen in homes across the US and in various countries, particularly in South America, the Philippines, and Canada. It is also referred to as a Grade 1 lock in certain regions.
A Step-by-Step Guide: Rekeying the Kwikset 660 Deadbolt
Introduction to Change Kwikset Key
In this blog post, we will explore the process of rekeying the Kwikset 660 deadbolt lock. This particular lock, while not a smart key lock, is extremely popular in the US and other parts of the world. Join us as we take you through the step-by-step process of rekeying this widely used lock.
Rekeying the Kwikset 660 Deadbolt
Section 1: Overview of the Kwikset 660 Deadbolt
The Kwikset 660 deadbolt lock is known for its popularity and widespread use. Although it lacks smart key technology, it is commonly seen in homes across the US and in various countries, particularly in South America, the Philippines, and Canada. It is also referred to as a Grade 1 lock in certain regions.
Disassembling the Kwikset Lock
To begin the rekeying process, you will need to disassemble the lock. Start by loosening the two screws that hold the lock in place. You can leave the bolt in the door as you remove the cylinder by carefully sliding it out. The cylinder is secured with a small C-clip, which can be easily dislodged with the help of a pick tool.
Identifying the Keyway and Tailpiece
Once you have removed the cylinder, it’s time to identify the keyway and tailpiece. In this case, we will be using the Kwikset KW1 key. The rekeying process becomes straightforward if you have the appropriate key. Simply insert the key at a 30-degree angle and push the follower through, revealing the lock’s five pin combination.
Understanding the Lock Parts
Before we dive into rekeying, it’s important to familiarize ourselves with the various parts of the lock. The top part, where the springs are located, is called the Bible. The central component is the plug, and the keyway or profile helps guide the key. Lastly, we have the Kwikset KW1 key, which is specific to this lock.
Rekeying Lock
Using the lab kit, we can now proceed to rekey the lock. Start by inserting the top pins back into their respective chambers. By working from the middle of the lock, you can easily place the pins back into position. Ensure that you hold the pins with tweezers and push them in until they are flush with the plug.
Adding the Bottom Pins and Springs
With the top pins securely in place, it’s time to install the bottom pins. These pins have a flat side that contacts the driver and a rounded side that enables smooth key insertion. Place the rounded side of the bottom pins facing downward and carefully insert them into their designated chambers. Don’t forget to add the springs as well.
Verifying the Rekeying
Before reassembling the lock, it’s essential to double-check the keying. In our case, we used a factory key, but you can also cut the keys by code. By using a Pro Lok tool, you can determine the cuts required for each pin. Verify that the pins match the desired combination and ensure that they are not sticking out too far.
Final Kwikset Assembly
Now that the rekeying process is complete, it’s time to put the lock back together. Begin by placing the key in the plug and aligning it at a 45-degree angle. Insert the plug into the cylinder and ensure it is securely in place. Avoid pulling the key out abruptly to prevent dislodging any components.
Installing the Deadbolt Tailpiece
To complete the rekeying process, install the deadbolt tailpiece. Make sure to reattach any clips or accessories that were removed during disassembly. It is advisable to replace these components if they show signs of wear or damage. Reinstall the lock in its original position and test the key to ensure a successful rekeying.
Conclusion
Rekeying the Kwikset 660 deadbolt lock is a straightforward process that can be done with a few simple tools and a bit of practice. By following the steps outlined in this blog post, you can confidently rekey these popular locks and ensure the security of your home or business. Remember, patience and attention to detail are key when working with precision lock components. Happy rekeying!
Author’s Note
Author’s Note: Join our membership site, Mr. Locksmith, for exclusive content on locksmithing techniques and business insights. We offer in-depth tutorials, bypass methods, and discussions on the evolving landscape of locksmithing. Visit our YouTube channel for a sneak peek at the exclusive videos available to our members.
Locksmith Training https://mrlocksmith.com/
#mrlocksmith #locksmith #AskMrLocksmith
JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS:
https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join
Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith Experience and has a BA (Honors) in Criminology.
Mr. Locksmith™ email: Terry@mrlocksmith.com
Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/
